EnerSolis 10KW
Three-phase Inverter
Acceptable Input Voltage up to 1000 Vdc
Transformer-less Topology
Maximum Efficiency 97.5%
Protection Class IP65
Dual Independent MPP Trackers
Intelligent MPPT Technology
Active and Passive Anti-islanding Technology
Compact Design
User Friendly LCD Display
High MTBF Components
Temperature-dependent Fan Cooling
Integrated DC Switch
High Performance DSP Controller
Built-in RS232 and RS485 Communication Ports
Firmware Upgradability
Wide MPPT Voltage Range with Nominal Power
Allowable De-rating Operation
Maximum Output Power Clamping
Multi-Operation Mode
Multi-Country Certifications
规格:
Model |
ES 6000 |
ES 8000 |
ES 10000 | |
Inverter Technology |
Conversion Mode |
Sine-wave, Current source, High frequency PWM | ||
Isolation Method |
Transformer-less Design | |||
DC Input Data |
Nominal DC Voltage |
740 Vdc | ||
Max. DC Input Voltage |
1000 Vdc | |||
Working Range |
300 ~ 1000 Vdc | |||
Max. DC Input current |
2 x 8 .5 Amp |
2 x 11 .4 Amp |
2 x 14 .3 Amp | |
MPPT Range |
370 ~ 850 Vdc | |||
MPPT Tracker |
2 | |||
AC Output Data |
Nominal AC Power |
6,000 Watt |
8,000 Watt |
10,000 Watt |
Max. AC Apparent Power |
6,600 VA |
8,800 VA |
11,000 VA | |
Nominal AC Voltage |
AC 230 V x 3 | |||
Output Connect Method |
3-Phase / 4-Wires (L1, L2, L3, N, PE) | |||
Nominal AC Current |
8.69 Amp x 3 |
11.59 Amp x 3 |
14.49 Amp x 3 | |
Frequency |
50/60Hz Auto-Selection (47.5 ~ 51.5Hz or 59.3 ~ 60.5Hz) | |||
Power Factor |
Leading 0.9 ~ Lagging 0.9 | |||
Current Distortion |
Total Harmonic current : Less than 5% | |||
Single Harmonic current: Less than 3% | ||||
Efficiency Data |
Max. Efficiency |
0.975 | ||
Euro Efficiency |
96.20% |
96.60% |
97.00% | |
Environmental |
Operating Temperature |
-20 °C ~ +60 °C | ||
-4 °F ~ 139 °F | ||||
Pollution degree classification |
PD3 | |||
Overvoltage category (DC side) |
Category II | |||
(IEC 60664 - 1) (AC side) |
Category III | |||
Humidity |
0 to 100% (Without condensation) | |||
Altitude |
0 ~ 2000 m / 0 ~ 6600 ft | |||
Mechanical |
Dimensions (H x W x D in mm / inch) |
451 x 595 x 247 / 17.7 x 23.4 x 9.72 | ||
Net Weight (kg / lbs) |
41 / 90.4 | |||
Gross Weight (kg / lbs) |
44 / 97.0 | |||
Protection Class |
IP65, outdoor | |||
Cooling |
Temperature-dependent fan | |||
AC Connection |
Connector | |||
DC Connection |
Connector | |||
Communication |
Communication Interface |
RS232 & RS485 (Standard) | ||
USB, RS485, Dry contact, TCP/IP (Optional) | ||||
Front Panel |
LCD |
Boost input Voltage、Boost input Current、Boost input Power、AC output Voltage、AC output frequency、AC output current 、AC output power、AC Energy yield、Inner Temperature、Heat sink Temperature 、Status message、 Error message | ||
LED |
On: Ground fault of DC input insulation fault | |||
On: Unit Error or Alarm | ||||
Flash: Standby or Sleeping mode | ||||
On: Normal operation | ||||
Key Pad |
UP key/ Down key/ Function key/ Enter key | |||
Protection |
Utility |
Over/under Voltage, Over/under Frequency, | ||
Ground fault, DC Isolation fault | ||||
Islanding operation detection |
Passive : Voltage phase jump detection | |||
Active : Reactive power control | ||||
Over Temperature |
Reduced output power | |||
Certification |
On Grid Performance |
VDE 0126 -1-1, VDE AR-N 4105, ENEL 2010, AS4777.2/3, UKG83/1, CGC | ||
Safety |
EN 62109-1, AS3100 | |||
EMI/EMC |
EN 61000-6-1, EN 61000-6-3, EN61000-3-3 | |||
*Specifications subject to change without notice. | ||||